Gionee S11 Lite flash file (stock firmware) will allow you to flash your phone and return it to its factory settings. It will unbrick, root, and fix your device if it is stuck on the boot logo. If your phone is lagging, flashing it should help.
Because flashing this firmware would completely erase your phone data, it is recommended that you backup your current firmware and all other vital data. Also, only flash your device if you’re sure you’re taking it seriously. This is to prevent your gadget from becoming unusable or bricked.
After that, make sure the device is charged to at least 30% so the process doesn’t get halted due to a low battery. If you find a broken link, please report it using the comments area or the contact form.
| Build | Firmware |
|---|---|
| SW17G17Z51_A_T7553 | Download (2.8 GB) |
To flash this firmware, you’ll need QFIL, CM2, Miracle Box, or any other Qualcomm supported tools. After that, get a working USB cable and start flashing, following the instructions below.
- Downloaded firmware should be unpacked into a new folder.
- Make sure you have all of the necessary drivers loaded on your computer.
- Load the firmware using SP Flashtool.
- You may need to wait a few seconds for it to finish processing.
- Now turn off your device and read the whole flashing instructions by clicking here.
If you need any assistance with this device or flashing instructions, or if you have any other suggestions, please leave them in the comments area below. We make every effort to respond to and answer your inquiries.
