Nextbook Next7P12 Firmware; How To Flash

From this post you can download Nextbook Next7P12 official firmware and learn how to easily flash the firmware following the instructions found immediately after the download options.



  1. Computer
  2. Nextbook Next7P12 device (at least 50% charged)
  3. SDcard
  4. Download both files from below 




How To Flash Next7P12 Firmware:

  1. As instructed, download both files from the link above to your Computer
  2. Get and empty SDcard. For best results, format the SDcard.
  3. Extract the content (uImage_recovery) of SMT_Next7P-8G_Mod_Recovery_( to the SDcard.
  4. Copy SMT_Next7P12-8G_Stock_Rom-signed_( to the root of the same SDcard. Do not extract any file from this archive.
  5. Insert the SDcard to your Next7P12 device.
  6. Boot the device by holding Vol Down (-) and Power buttons.
  7. The device will now boot into recovery mode. From recovery screen, select Install Zip.
  8. Navigate to the root of your SDcard and select SMT_Next7P12-8G_Stock_Rom-signed_( 
  9. Wait for the flashing process to complete.
  10. Once complete, remove the SDcard and boot the device normally.

That’s all.


If you need further assistance with this, post in comments section and we’ll get back to you ASAP.


  1. ponce April 28, 2021
  2. devicemodder February 1, 2021
  3. cy January 28, 2021
    • Collins Edim January 30, 2021
  4. cy January 28, 2021
    • Collins Edim January 28, 2021
  5. Rudy July 24, 2020
  6. carlos July 18, 2020
  7. Arthur Dale April 9, 2020
    • Collins Edim April 11, 2020

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.