Samsung Galaxy Note 10+ (SM-N975F) firmware (Unbrick/Repair)

Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy Note 10+ (SM-N975F) can easily be done using this official firmware. The firmware consist of five (5) files- AP, BL and CP, as well as two (2) files to choose from – CSC or HOME_CSC.

CSC – this will format all user data on the smartphone to “out of the box” stock state
HOME_CSC – all user data, including internal storage, will remain untouched.

So in essence, this repair firmware will unbrick your smartphone and fix related software faults on the device.

This firmware fixes software issues like:-

  • Un-brick bricked devices
  • Fix apps force closing
  • Device getting stuck during use, or lagging
  • Fix stuck on boot logo
  • Fix boot loop
  • Remove custom recovery (e.g., TWRP)
  • Remove root and restore default system files
  • Help upgrade/ update Android version to latest security patch
  • And just any software related faults

Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your exact device model. This is necessary to avoid downloading the wrong file, causing your device to brick.

Download Samsung Galaxy Note 10+ (SM-N975F) firmware

Android 11 R

PDA | CSCRegionFirmwareBuild Date
N975FXXU6ETLL / N975FOXM6ETLLGermany (DBT)Download2020-12-24
N975FXXS6EUA1 / N975FOXM6ETLLRussia (SER)
India (INS)
Download2021-01-04

Android 10 Q

PDA | CSCRegionFirmwareBuild Date
N975FXXU1BSL7 / N975FOXM1BSL7Russia (SER)Download2019-12-10
N975FXXU1BSL7 / N975FOXM1BSL7Kazakhstan (SKZ)Download2019-12-10
N975FXXU1BTA5 / N975FOXM1BTA6Thailand (THL)Download2020-01-16
N975FXXU3CTC9 / N975FOXM3CTC7Germany (DBT)Download2020-03-20
N975FXXU3 / N975FXXU3CTC7Russia (SER)Download2020-04-03
N975FXXS6CTGAGermany (DBT)Download2020-07-24
N975FXXU6DTH7 / N975FOXM6DTH7Germany (DBT)Download2020-08-28
N975FXXS6DTI5 / N975FOXM6DTH7Thailand (THL)Download2020-09-17
N975FXXU6DTJ4Russia (SER)Download2020-10-16

Android 9 Pie

PDA | CSCRegionFirmwareBuild Date
N975FXXU1ASH5 / N975FOXM1ASH5Russian (SER)Download2019-08-09
N975FXXU1ASHE / N975FOXM1ASHERussian (SER)Download2019-08-09
N975FXXU1ASJ2 / N975FOXM1ASJ2Russian (SER)Download2019-10-01
N975FXXS1ASJG / N975FOXM1ASJ2Russian (SER)Download2019-10-26

How to flash Samsung Galaxy Note 10+ (SM-N975F) via Odin

Note: Backup all important data (messages, contacts, app data, settings, etc.) as these might be erased once flashing is successful.

Charge your phone to at least 30% before you proceed with the flashing instructions below. Read and follow all steps carefully, especially if you are not very experienced in flashing Samsung devices.

  • Download and install Samsung official USB driver on your computer. (Skip step if already installed)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  • Connect device to Computer via USB cable and wait until you get a blue sign in Odin
  • Select/ add the four firmware files extracted in step one.
    • For instance, BL is the bootloader file- click BL in Odin and select that file. In the same way, click AP, CP, and CSC select the files accordingly. See below screenshot
Samsung Odin
  • Make sure re-partition is NOT ticked
  • Click the start button and wait few minutes for the flashing process to begin and complete
  • Once flashing is complete, disconnect device and boot normally.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.