Samsung Galaxy J7 Pro SM-J730 Firmware (Unbrick/Repair)

Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy J7 Pro (SM-J730) can easily be done using this official firmware.

This is a four-file (AP, BL, CP and CSC) repair firmware with which you can unbrick your smartphone and/or fix other software faults on the device.

This firmware fixes software issues like:-

  • Un-brick bricked device
  • Fix apps force closing
  • Device getting stuck during use, or laggy
  • Fix stuck on boot logo
  • Fix boot loop
  • Remove custom recovery (TWRP, CWM, Philz, etc.)
  • Remove root and restore default system files
  • Facilitate upgrade/update of Android software version to latest security patch, and lots more.

Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your exact device model. This is necessary to avoid downloading the wrong file, causing your device to brick.

Firmware details/ Download

ModelSM-J730GM
J730GMDXU6CSF5_J730GMOLD6CSED_THL_9.0Download / Download
J730GMUBS6BSC1_J730GMUWA6BSC2_CHL_8.1Download / Download
J730GMDXU5BRI3_J730GMOLD5BRI3_THL_8.1Download
J730GMDXU3ARF2_J730GMODD3ARF3_7.0Download
J730GMDXU2AQL1_J730GMODD2AQL1_7.0Download
J730GMDXU1AQF9_J730GMODD1AQF7_7.0Download

ModelSM-J730K
J730KKKS5CUD1_J730KKTC5CUD1_KTC_9.0Download
J730KKKU4CTF3_J730KKTC4CTF3_KTC_9.0Download
J730KKKU3CSL1_J730KKTC3CSL1_KTC_9.0Download
J730KKKU2CSF5_J730KKTC2CSF5_KTC_9.0Download
J730KKKU2CSF5_J730KKTC2CSF5_KTC_9.0Download / Download
J730KKKU2ARF1_J730KKTC2ARF1_KTC_7.0Download

ModelSM-J730FM
J730FMXXU7CSK2_J730FMOXY7CSK1_SER_9.0Download
J730FMXXU6CSG3_J730FMOXY6CSG3_SER_9.0Download
J730FMXXU5CSF4_J730FMOXY5CSEE_SER_9.0Download / Download
J730FMXXU4BRI3_J730FMOXY4BRI3_SER_8.1Download
J730FMXXU3ARF2_J730FMOXY3ARF2_SER_7.0Download
J730FMXXU2ARA3_J730FMOXY2ARA3_SER_7.0Download
J730FMXXU1AQI4_J730FMOXY1AQI4_SER_7.0Download

ModelSM-J730G / SM-J730G-DS
J730GDXU7CSG3_J730GOLB7CSG3_XXV_9.0Download
J730GDXU6CSF4_J730GOLB6CSED_XXV_9.0Download / Download
J730GDXS6BSD1_J730GOLB6BSD1_XXV_8.1Download / Download
J730GUBS6BSC1_J730GUUB6BSC1_TPA_8.1Download / Download
J730GUBU3ARA2_J730GUUB3ARA2_TTTDownload
J730GUBU2AQI3_J730GZTO2AQI3_ZTODownload

ModelSM-J730F / SM-J730F-DS
J730FXXU8CUE8_J730FDBT8CUE8_DBT_9.0Download
J730FXXS7CTH2_J730FDBT7CTH2_DBT_9.0Download
J730FXXU6CSK6_J730FDBT6CSK6_DBT_9.0Download
J730FXXU5CSG3_J730FXEF5CSG3_XEF_9.0Download
J730FXXU4CSF1_J730FDBT4CSEE_DBT_9.0Download
J730FXXU3BRI3_J730FOXA3BRI4_PHE_8.1Download
J730FXXU2ARB1_J730FXEF2ARB1_XEF_7.0Download
J730FXXU1AQI5_J730FITV1AQH2_ITVDownload

How to flash Samsung Galaxy J7 Pro SM-J730 via Odin

Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be erased once flashing is successful.

Charge your phone to at least 50% before you proceed with the flashing instructions below. Read and follow all steps carefully, especially if you are not very experienced in flashing Samsung devices.

  • Download and install Samsung official USB driver on your computer. (Skip step if already installed)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  • Connect device to Computer via USB cable and wait until you get a blue sign in Odin
  • Select/ add the four firmware files extracted in step one.
    • For instance, BL is the bootloader file- click BL in Odin and select that file. In the same way, click AP, CP, and CSC select the files accordingly. See below screenshot
  • Make sure re-partition is NOT ticked
  • Click the start button and wait few minutes for the flashing process to begin and complete
  • Once flashing is complete, disconnect device and boot normally.

7 Comments

  1. Lyndon
  2. Lyndon
  3. Lyndon
  4. Junior Matovu
  5. Mike
  6. fadhili madaraka

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.