Huawei Mediapad S7-301u Official Firmware Update

You can download Huawei Mediapad S7-301u official stock firmware (OTA update) from the link in this post, and follow the provided flashing instructions to learn how to flash the stock ROM.

If you notice that any of the links provided below is broken or doesn’t work, please post in comments section so we fix and update it ASAP.

Download Mediapad S7-301u flash file

File NameHUAWEI_S7-301u_ FIRMWARE_Android4.0
_C232B005_General_ Channel_05010YBX.zip
Size221 MB
StateStock
FirmwareDownload

File NameS7-301u_V100R002 C002B008_ROOT.zip
Size328 MB
StateRooted
FirmwareDownload

How to flash Mediapad S7-301u firmware

In order to install the firmware on your Mediapad S7-301u, you need:

  • SD card
  • Archive with firmware, downloaded from any link above (may contain dload folder with files- unlmt.cfg and update.zip or only update.zip)
  • Fully charged battery

So, in order to flash the firmware you need to perform the following steps:

  1. Copy the dload folder from the archive with the firmware to the root of the SD card (if the archive contains only the update.zip file – create the dload folder and copy the update.zip file and an empty file with the name unlmt.cfg into it);
  2. Reboot tablet;
  3. After the reboot, a green Android with gears should appear and the process of flashing will begin, during which a reboot will occur;
  4. As soon as the process is over – remove the SD card and the device will reboot. Do not insert the SD card until the device reboots again, and then do not forget to remove the firmware files from it.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.