To flash your L8star Mini Phone and restore to factory default state, download the firmware (flash file) in this post and follow the recommended flashing instructions (and tool). It will un-brick and fix errors in the device, and if it was previously rooted, flashing this stock ROM will overwrite all modified system files to replace with factory software.
Make sure to backup all valuable data on the phone, like contacts, messages, app data, etc. This is usually a necessary step before flashing, or resetting your smartphone or tablet. After this process is complete, all data on the device is completely lost.
Again, ensure to charge the phone to at least 30%. So the flashing process is not interrupted by low battery. Interrupting the firmware installation could result to a dead device.
Download the firmware file from the link below and follow the recommended flashing instructions immediately after the download options. Please report any broken links discovered.
Firmware read info:-
Phone found! [ 4 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 0244999A990E82A4A42CAEBE76BB8FDD
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
File_Info : HEXING61D_WIFI_11C_PCB01_gprs_MT6261_S00.M20_JHD_N2_ZX_SSD1306Z_L24EN_190722.bin
FileVersion : M20_JHD_N2_ZX_SSD1306Z_L24EN_190722
Done!
Elapsed: 00:00:24
Reconnect Power/Cable!
| Build | HEXING61D_WIFI_11C_PCB01_gprs_MT6261_S00.M20_JHD_N2_ZX_SSD1306Z_L24EN_190722 |
| Firmware | Download |
| Size | 5 MB |
Important! Always backup existing firmware before flashing any other firmware.
How to flash
After downloading the firmware from above link, extract the contents of the archive to an empty folder on your computer and flash via Miracle Box or any other tool that supports .BIN firmware.
If you have any questions or other contribution please post in comments section for assistance.
