Huawei Ascend G630 official stock firmware

Download Huawei Ascend G630 official stock firmware update from the links in this post, and follow the provided flashing instructions to learn how to flash the stock ROM.

If you notice that any of the links provided below is broken or doesn’t work, please post in comments section so we fix and update it ASAP.

Huawei Ascend G630 (G630-U00) firmware

Build numberFirmware linkFile size
V100R001C17B122Download685 MB

Huawei Ascend G630 (G630-U10) flashtool firmware

Build numberRegionFirmware linkFile size
G630-U10 V100R001C00B127CUSTC10D001Non-specific (Russian, UzbekistanDownload763 MB
G630-U10_V100R001C00B159CUSTC433D001Non-specific (Middle EastDownload689 MB
V100R001C00B159CUSTC470D001PhilippinesDownload679 MB
V100R001C00B125CUSTC433D001NigeriaDownload602 MB
V100R001C00B160CUSTC10D001RussiaDownload758 MB

Huawei Ascend G630 (G630-U20) flashtool firmware

Build numberRegionFirmware linkFile size
V100R001C00B127CUSTC432D001PolandDownload687 MB
G630-U20V100R001C00B126CUSTC21D002SpainDownload806 MB
V100R001C00B159CUSTC432D001BelgiumDownload693 MB
V100R001C00B159CUSTC432D001HungaryDownload618 MB
V100R001C00B127CUSTC432D001CroatiaDownload680 MB

Huawei Ascend G630 (G630-U251) flashtool firmware

Build numberRegionFirmware linkFile size
V100R001C00B116CUSTC40D116ChileDownload748 MB
V100R001CUSTC605D001VenezuelaDownload694 MB
V100R001C00B159CUSTC605D001PanamaDownload706 MB
V100R001C00B157CUSTC470D001PhilippinesDownload689 MB
V100R001C00B120Latin America, GuatemalaDownload623 MB
V100R001C00B159CUSTC605D001Nonspecific (Northern Latin AmericaDownload637 MB

How to flash Huawei firmware

In order to install this firmware on your device, you need:

  • SD card
  • Archive with firmware, downloaded from any link above (may contain dload folder with files- unlmt.cfg and update.zip or only update.zip)
  • Fully charged battery

So, in order to flash the firmware you need to perform the following steps:

  1. Copy the dload folder from the archive with the firmware to the root of the SD card (if the archive contains only the update.zip file – create the dload folder and copy the update.zip file and an empty file with the name unlmt.cfg into it);
  2. Reboot tablet;
  3. After the reboot, a green Android with gears should appear and the process of flashing will begin, during which a reboot will occur;
  4. As soon as the process is over – remove the SD card and the device will reboot. Do not insert the SD card until the device reboots again, and then do not forget to remove the firmware files from it.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.