After downloading Samsung Odin ‘flashable’ firmware package, follow the instructions below to flash the firmware on your device with ease.
If you don’t have the firmware file already, download from below.
How to flash Samsung firmware
- Download files required above.
- Extract the .tar.md5 file from downloaded firmware zip or rar package.
- Run Odin. (Ensure that Odin3.ini is in the same folder as Odin3 v3.09.exe)
- Power off your device and boot into Download mode: Vol Down + Home + Power Button, then press Vol Up
- Now connect the device to PC via USB cable.
- In Odin, select PDA/AP , then navigate to the folder where you placed the extracted .md5 firmware file
- Click on Start and allow flashing to complete.
- Done!
Your device should boot up automatically.
12 Comments
thanks for all your services.
You\’re very much welcome ?
How can I remove Samsung password with out flashing the whole firmware
Depends on which Samsung device you have. If you find any method to do that though, it might just work on Android 4.4 and older. But then, like I already said \”the method to use depends on the Samsung device you have\”.
How to use infinity cm2 mtk v 2.7 and infinity cm2 spd v2.02
https://www.youtube.com/watch?v=YNCEZDVVYTw
Ok thanks very much my diary but the fact is that how can I unlock Samsung phones
i couldn\’t download samsung usb driver
https://developer.samsung.com/mobile/android-usb-driver.html
model:GT-I9300 not mobile fleas, how to flasing
Just download the firmware from https://www.leakite.com/samsung-galaxy-s3-gt-i9300-firmware-unbrick-repair/, then follow instructions here.
My SM-A510F was flashed with a wrong firmware. it is now bricked and no key is working. how can I reflash it using the correct firmware. I cant go into download mode and my pc cant recognize the phone.