Some stock roms / firmware packages use .nb0 extension and cannot be flashed using the likes of SmartPhone flashtool, Spreadtrum Update Tool, etc.
Some device manufacturers though, have made it possible for its official software updates in .nb0 extension to be flashed via the phone’s stock recovery. This feature may not be available to all devices, hence this post.
With Software Update Tool (SUT) you can easily flash your device stock firmware via a Computer. The process explained below is very simple. Read and follow the guide carefully.
Flashing .nb0 firmware files
- Download and install your device driver on your PC
- Download Software Update Tool (SUT)
- Install and run SUT-L3 on your Computer
- Unzip the downloaded .nb0 firmware from its zip archive and place in any folder. Extracting to desktop should be cool.
- Reboot the device to fastboot / download mode / bootloader. (adb reboot bootloader, or power off then use button combo)
- Connect device to PC
- From SUT-L3 interface, click on … or the empty box and select the extracted .nb0 firmware and click Next
- In the next page, select Erase User Data, then proceed
- The flashing should now commence. Wait a few minutes for this process to complete.
- Disconnect the device and reboot!
- Done!
Leave your complaints and suggestions in the comments section below.
12 Comments
Hi my Huawei P9 plus Brick can not boot. How to fix? thank!
I've already replied your comment in Huawei firmware section.
My phone is infocus M810 and it is stucked, after booting phone it shows encryption unsuccessful reset phone, i had done all the methods provided buy you, wiping data and cache, flashing firmware by sut.tool, but unfortunately it is not working. please suggest me something.
my infous m2 4g mobile had stuck on boot loop while updating it has fail and show installation aborted so i download firmware it shows .nbo extention
so the problem is my device couldn\’t show drivers on pc then how can i fash the mobile ?
Have you checked in Windows Device Manager to see whether or not your device driver is listed there?
is it able to flash using TWRP recovery?
my infocus m370i is rooted nd i want to install stock. I have all the stuffs that required and i tried the whole process but at last the error comes up with download failed and files not found
bro my andriod infocus m370i\’ s all partions are cleared(or)deleted …so i cant use button combo..or else use adb commands because drivers are not able not install…so how can i flash now…???
how to flash infocus epic one , tool not detecting phone , mtk usb port driver load
Try reinstalling the drivers in SUT-L folder.
Dear, the link suppose to work? it doesn\’t work for me thou
The link was down, but it has just been updated!