Download Essential Phone PH1 Official Stock Firmware Flash File

Download the official firmware for all Essential Phone PH1 builds from the link here, and follow the provided flashing instructions to learn how to flash the stock rom images.

If you notice that any of the links provided below is broken or doesn’t work, please post in comments section so we fix and update it ASAP.

 

Download Options

Build NMI81C

File Name: PH1-Images-NMI81C.zip
Size: 1.04 GB
Carrier: Sprint & Telus
FirmwareDownload

 

Build NMJ32F

File Name: PH1-Images-NMJ32F.zip
Size: 1.04 GB
Carrier: All
FirmwareDownload

 

Build NMJ51B

File Name: PH1-Images-NMJ51B.zip
Size: 1.04 GB
Carrier: All
FirmwareDownload

 

Build NMK24B

File Name: PH1-Images-NMK24B.zip
Size: 1.04 GB
Carrier: All
FirmwareDownload

 

How to flash

To flash any of the factory images downloaded from the links above, follow the instructions below carefully.

 

Enable OEM unlocking first
Before you can flash a new image, ensure Developer options are enabled and OEM unlocking is turned on. To do this:

 

• Tap Settings, then tap System > About phone
• Scroll to the bottom of the page, then tap Build number multiple times until you see the pop-up message “You are now a developer” (It usually takes seven taps)
• Go back one screen to System, then tap Developer options
• Find the option: OEM Unlocking and turn it on

 

Fastboot mode
Put your Essential Phone into fastboot mode by doing either of the following:

 

• Connect the phone to PC and use command prompt to run the ADB (how to install ADB) command below:

adb reboot bootloader 

• Reboot your phone while holding the Volume-down button

 

Unlock your bootloader
NOTE: Installing the factory image will erase all information from your device. So remember to backup your phone before continuing.

 

• Run the command: fastboot flashing unlock
• Press the Volume-down button to navigate to the YES option, then press the Power button to confirm

 

Flash your factory image
• Download the factory image to your computer
• Unzip the downloaded file
• Go to where you unzipped the images
• For Linux / Mac OS X – Run the command: flashall.sh
• For Windows – Run the command: flashall.bat

 

Relock your bootloader
After flashing, it’s a good idea to relock your bootloader for security.
• Go back to fastboot mode
• Run the command: fastboot flashing lock

Done.

2 Comments

  1. seth nuete October 14, 2018
    • Collins Edim October 15, 2018

Leave a Reply