This Energy Neo 3 Lite factory (official) flash file for both the 7-inch and 10-inch tablet models will help you flash and restore your tablet to its default factory state. It will remove root, virus, un-brick, and fix your device if it’s stuck on boot logo.
Additionally, you should consider making a backup of your current firmware, and all other important data on your tablet. Flashing will completely erase your tablet data. Only flash your tablet if you actually know what you’re doing- to avoid messing up your device, or turning it into a brick.
It’s also important that your tablet is charged to at least 30% so the process is not interrupted as a result of low battery.
If there’s a broken link, do not hesitate to report via the comments section or use the contact form.
Flashing instructions
The firmware package already contains flashtool + flashing instructions and required USB drivers for the tool to work. Once you’ve downloaded the file, unpack the archive and read the PDF instructions file to guide you.
If you need any help on this device or flashing instructions, or you’ve got other contribution- do not hesitate to post in the comments section below. We do our best to reply and answer your questions.