To return your LG K30 to its factory settings, download this firmware. It fixes some faults like device stuck on the boot logo; the firmware will also remove root, virus, un-brick, and fix your phone. If your phone is lagging, flashing it should help.
You should also consider backing up your current firmware as well as any other vital data on your phone. Your phone will be completely erased if you flash it. Also, only flash your device if you’re sure you understand what you’re doing. To avoid bricking your gadget or causing it to malfunction.
It’s also important that your device is charged up to at least 30% so the process is not interrupted due to shutdown.
Link broken? do not hesitate to report via the comments section or use the contact form if necessary.
Details + Download Link For LG K30 firmware
Region / Carrier | Link | Build |
---|---|---|
USA / T-Mobile | Download | X410TK20l_00_TMO_US_OP_0330 |
How to flash LG KDZ firmware
After downloading this official firmware for LG K30 from the link(s) above, the following instructions will guide through the flashing process.
Please follow all steps correctly, to avoid ‘killing’ your phone.
- First, download LG UP 1.14 or LG UP 1.16 flashtool to your Computer
- Now turn off your device and enter Download mode.
- Press and hold the Volume Up key, then connect USB cable.
- Open LG UP tool, choose “Upgrade” and select your KDZ file (the file you already downloaded here).
- Finally click “Start“
- Wait for the process to begin and complete without interruption
- Your device will reboot on completion, then you can disconnect it from the PC.
Need more help on this? post in comments section. If there’s something else you’d to share or bring to our notice, also use the comments section down below!