Tecno Pop 7 Pro BF7 stock firmware



Updated: June 27, 2024

Download this Tecno Pop 7 Pro BF7 firmware flash file (stock ROM) to unbrick your device and put it back to the way it was when it left the factory. If you previously rooted or modified the system partition in any way, flashing this stock ROM will overwrite all existing modified system files to replace them with factory software.

Ensure to backup all valuable data on the phone, like contacts, messages, app data, etc. This is usually a necessary step before flashing or resetting your smartphone or tablet. After this process is complete, all data on the device is completely lost.

Again, ensure to charge the phone to at least 30% so the flashing process is not interrupted by low battery. Interrupting the firmware installation process could result in a dead device.

Follow the recommended flashing steps right after the download options. You can get the firmware file from the link below. Please report any broken links you discover.

Download Tecno Pop 7 Pro BF7 stock firmware

Build: Tecno_Pop_7_Pro_BF7_MT6761_V709_230106
Size: 2.98 GB

Download (Free)

Build: Tecno_Pop_7_Pro_BF7_MT6761_V1014_230315
Size: 2.94 GB

Download (Free)

Build: Tecno_Pop_7_Pro_BF7_MT6761_RU_V1044_230327
Size: 2.55 GB

Download (Free)

Important! Always backup existing firmware before flashing any other firmware.

How to flash

To flash this factory-signed firmware, download and flash it with Tecno Flashtool (Download here). Flashing with another tool might result in errors, and flashing will fill. Extract the contents of the firmware archive and flash with a non-faulty USB cable.

If you have any questions or other contributions, please post them in the comments section for assistance. See other tecno stock firmware here.