Download this Tecno Camon 17 Pro CG8 firmware flash file (stock ROM) to unbrick your device and put it back to the way it was when it left the factory. If you previously rooted or modified the system partition in any way, flashing this stock ROM will overwrite all existing modified system files to replace them with factory software.
Ensure to backup all valuable data on the phone, like contacts, messages, app data, etc. This is usually a necessary step before flashing or resetting your smartphone or tablet. After this process is complete, all data on the device is completely lost.
Again, ensure to charge the phone to at least 30% so the flashing process is not interrupted by low battery. Interrupting the firmware installation process could result in a dead device.
Follow the recommended flashing steps right after the download options. You can get the firmware file from the link below. Please report any broken links you discover.
Download Tecno Camon 17 Pro CG8 stock firmware
Build: Tecno_Camon_17_Pro_CG8_MT6785_V141_210129
Size: 3 GB
Build: Tecno_Camon_17_Pro_CG8_MT6785_V153_210428
Size: 3 GB
Build: Tecno_Camon_17_Pro_CG8_MT6785_V194_210223_OTA
Size: 3 GB
How-to Flash (install): Copy update to phone sd memory and flash it from stock recovery mode.
Build: Tecno_Camon_17_Pro_CG8_MT6785_V226_210304_OTA
Size: 3 GB
How-to Flash (install): Copy update to phone sd memory and flash it from stock recovery mode.
Build: Tecno_Camon_17_Pro_CG8_MT6785_V471_210517
Size: 3.64 GB
Build: Tecno_Camon_17_Pro_CG8_MT6785_V805_211201
Size: 4.02 GB
Build: Tecno_Camon_Pro_17_CG8_MT6785_V819_211210
Size: 4.01 GB
Build: Tecno_Camon_17_Pro_CG8_MT6785_V872_220210
Size: 4.01 GB
Build: Tecno_Camon_17_Pro_CG8_MT6785_V907_220417
Size: 3.97 GB
Build: Tecno_Camon_17_Pro_CG8_MT6785_V922_220610
Size: 3.99 GB
Build: Tecno_Camon_17_Pro_CG8_MT6785_V941_220823
Size: 4 GB
Build: Tecno_Camon_17_Pro_CG8_MT6785_V944_220926
Size: 4 GB
Important! Always backup existing firmware before flashing any other firmware.
How to flash
To flash this factory-signed firmware, download and flash it with Tecno Flashtool (Download here). Flashing with another tool might result in errors, and flashing will fill. Extract the contents of the firmware archive and flash with a non-faulty USB cable.
If you have any questions or other contributions, please post them in the comments section for assistance. See other tecno stock firmware here.