logo

Samsung Galaxy J4 Plus Firmware (Unbrick/Repair)

Leakite

Leakite

Updated: June 25, 2024

Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy J4 Plus can easily be done using this official firmware.

This is a four file (AP, BL, CP and CSC) repair firmware with which you can unbrick your smartphone and/or fix other software faults on the device.

This firmware fixes software issues like:-

  • Un-brick bricked devices
  • Fix apps force closing
  • Device getting stuck during use, or lagging
  • Fix stuck on boot logo
  • Fix boot loop
  • Remove custom recovery (e.g, TWRP)
  • Remove root and restore default system files
  • Help upgrade/ update Android version to latest security patch
  • And just any software related faults

Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your exact device model. This is necessary to avoid downloading the wrong file, causing your device to brick.

Samsung Galaxy J4 Plus (SM-J415F) firmware

ModelSM-J415F
J415FXXU2ASC1_J415FOLM2ASC1_XXV_8.1Download | Download
J415FXXU1ARIK_J415FOJM1ARIK_EGY_8.1Download | Download

Samsung Galaxy J4 Plus (SM-J415FN) firmware

ModelSM-J415FN
J415FNXXU2ASC1_J415FNOXM2ASC1_DBT_8.1Download | Download
J415FNXXU1ARIK_J415FNOXM1ARIK_DBT_8.1Download | Download

Samsung Galaxy J4 Plus (SM-J415G) firmware

ModelSM-J415G
J415GUBS2ASD3_J415GOWO2ASD3_ZTO_8.1Download | Download
J415GUBU1ARIK_J415GOWO1ARIK_CHO_8.1Download | Download

Samsung Galaxy J4 Plus (SM-J415GN) firmware

ModelSM-J415GN
J415GNDXU1ARK5_J415GNTGY1ARK5_TGY__8.1Download | Download

How to flash Samsung Galaxy J4+ via Odin

Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be erased once flashing is successful.

Charge your phone to at least 50% before you proceed with the flashing instructions below. Read and follow all steps carefully, especially if you are not very experienced in flashing Samsung devices.

  • Download and install Samsung official USB driver on your computer. (Skip step if already installed)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  • Connect device to Computer via USB cable and wait until you get a blue sign in Odin
  • Select/ add the four firmware files extracted in step one.
    • For instance, BL is the bootloader file- click BL in Odin and select that file. In the same way, click AP, CP, and CSC select the files accordingly. See below screenshot

image

  • Make sure re-partition is NOT ticked
  • Click the start button and wait few minutes for the flashing process to begin and complete
  • Once flashing is complete, disconnect device and boot normally.