logo

Samsung Galaxy A30s SM-A307FN official firmware Download

Leakite

Leakite

Updated: June 26, 2024

Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy A30s SM-A307FN can be easily done using this official stock firmware.

  • This firmware fixes software issues like-
    • Apps force closing
    • Device getting stuck during use, or lagging
    • Fix stuck on boot logo
    • Fix boot loop
    • Remove custom recovery (e.g, TWRP)
    • Remove root and restore default system files
    • Upgrade/ update Android version to latest security patch
    • And just any software related faults

Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your exact device model. This is necessary to avoid downloading the wrong file, causing your device to brick.

Firmware details/ Download

PDA/AP VersionA307FNXXU1ASI1
CSC VersionA307FNOXM1ASI1
RegionSEK — Ukraine
Android Version9 (Pie)
Build Date2019-09-03
Size3.50 GB
FirmwareDownload

PDA/AP VersionA307FNOXM1ASI1
CSC VersionA307FNOXM1ASI1
RegionCAC — Uzbekistan
Android Version9 (Pie)
Build Date2019-09-03
Size3.50 GB
FirmwareDownload

PDA/AP VersionA307FNXXU1ASI1
CSC VersionA307FNOEM1ASI1
RegionPHN — Netherlands
Android Version9 (Pie)
Build Date2019-09-03
Size3.65 GB
FirmwareDownload

PDA/AP VersionA307FNXXU1ASI1
CSC VersionA307FNOEM1ASI1
RegionPHE — Spain
Android Version9 (Pie)
Build Date2019-09-03
Size3.65 GB
FirmwareDownload

PDA/AP VersionA307FNXXU1ASI1
CSC VersionA307FNOEM1ASI1
RegionITV — Italy
Android Version9 (Pie)
Build Date2019-09-03
Size3.65 GB
FirmwareDownload

How to flash Samsung Galaxy A30s SM-A307FN flash file via Odin

Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be erased once flashing is successful.

Charge your phone to at least 50% before you proceed with the flashing instructions below. Read and follow all steps carefully, especially if you are not very experienced in flashing Samsung devices.

  • Download and install Samsung official USB driver on your computer. (Skip step if already installed)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  • Connect device to Computer via USB cable and wait until you get a blue sign in Odin
  • Select/ add the firmware file extracted in step one to AP / PDA
  • Make sure re-partition is NOT ticked
  • Click the start button and wait few minutes for the flashing process to begin and complete
  • Once flashing is complete, disconnect device and boot normally.