L8star Mini Phone firmware flash file



Updated: June 25, 2024

To flash your L8star Mini Phone and restore it to a factory default state, download the firmware (flash file) in this post and follow the recommended flashing instructions (and tool). It will un-brick and fix errors in the device, and if it was previously rooted, flashing this stock ROM will overwrite all modified system files to replace them with factory software.


Make sure to backup all valuable data on the phone, like contacts, messages, app data, etc. This is usually a necessary step before flashing, or resetting, your smartphone or tablet. After this process is complete, all data on the device is completely lost.

Again, ensure to charge the phone to at least 30%. So the flashing process is not interrupted by low battery. Interrupting the firmware installation could result to a dead device.

Download the firmware file from the link below and follow the recommended flashing instructions immediately after the download options. Please report any broken links you discover.

Firmware read info:-

Phone found! [ 4 ] Sync... Sync Ok, read regs... Inital regs read done Boot Info : BB_CPU_ID : 6261 BB_CPU_HW : CB01 BB_CPU_SW : 0001 BB_CPU_SB : 8000 BB_CPU_NM : [MediaTek] MT6261_S0000 BB_CPU_SN : 0244999A990E82A4A42CAEBE76BB8FDD BROM Protocol Version : 05 Setting... Setting done , result code 0x000E BROM stage done Seek and prepare DownloadAgent DownloadAgent matching HW Found! DA verify and select done Sending DA to target ... DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E SOC_VERIFY : 0xC1 BOOT_STYLE : SF_FLASH_BOOT NOR Flash IC initialized [0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV [0] : FLASH_DIE : 00EF 0070 0016 0000 [0] : FLASH_LEN : 0x00400000 INT_RAM : 0x0000D000 EXT_RAM : 0x00400000

File_Info : HEXING61D_WIFI_11C_ PCB01_gprs_MT6261_S00.M20_ JHD_N2_ZX_SSD1306Z_L24EN _190722.bin FileVersion : M20_JHD_N2_ZX_SSD1306Z_L24EN_190722

Done! Elapsed: 00:00:24 Reconnect Power/Cable!

BuildHEXING61D_WIFI _11C_PCB01_ gprs_MT6261 _S00.M20_ JHD_N2_ZX_ SSD1306Z_ L24EN_ 190722
Size5 MB

Important! Always backup existing firmware before flashing any other firmware.

How to flash

After downloading the firmware from the above link, extract the contents of the archive to an empty folder on your computer and flash via Miracle Box or any other tool that supports .BIN firmware.

If you have any questions or other contributions, please post them in the comments section for assistance.