Infinix Smart 5 X657B stock firmware
Leakite
Updated: June 26, 2024
Infinix Smart 5 X657B flash file (stock firmware) will help you flash and restore your phone to its default factory state. It will remove root, remove viruses, unbrick, and fix your device if it’s stuck on the boot logo. If your phone lags, flashing it should make it better.
Additionally, you should consider making a backup of your current firmware and all other important data on your phone. Flashing will completely erase your phone. Also, you should only flash your device if you actually know what you’re doing. to avoid messing up your device or turning it into a brick.
It’s also important that your device is charged up to at least 30% so the process is not interrupted by a shutdown.
If there’s a broken link, do not hesitate to report it via the comments section or use the contact form.
Infinix Smart 5 X657B stock (factory) firmware download links
Build: Infinix_Smart_5_X657B_MT6761_V022_210421
Size: 1.52 GB
Build: Infinix_Smart_5_X657B_MT6761_V25_210422
Size: 1.57 GB
Build: Infinix_Smart_5_X657B_MT6761_V57_200409
Size: 3 GB
Build: Infinix_Hot_10_Lite_X657B_MT6761_V141_210421_10
Size: 1.62 GB
Build: Infinix_Smart_5_X657B_MT6761_V172_211015
Size: 1.71 GB
Build: Infinix_Smart_5_X657B_MT6761_V382_210602
Size: 1.71 GB
Build: Infinix_Smart_5_X657B_MT6761_V386_210728
Size: 1.72 GB
Build: Infinix_Smart_5_X657B_MT6761_V388_210825
Size: 1.73 GB
Build: Infinix_Smart_5_X657B_MT6761_V422_220406
Size: 1.73 GB
Build: Infinix_Smart_5_X657B_MT6761_V427_211025
Size: 1.82 GB
Build: Infinix_Smart_5_X657B_MT6761_V438_220822
Size: 1.73 GB
Build: Infinix_Smart_5_X657B_MT6761_V478_211103
Size: 1.82 GB
Build: Infinix_Smart_5_X657B_MT6761_V952_220323
Size: 1.84 GB
Flashing instructions
You need a tool like SP Flashtool, Miracle Box, AfterSales SWD Tool (recommended), etc., to flash this firmware. Get a working USB cable, then follow the instructions below-
- Unpack downloaded firmware to an empty folder
- Make sure you’ve installed the required drivers on your PC.
- Launch flashtool and load the firmware. You might need to wait a few seconds for it to process completely
- Now power off your device and click here to read full flashing instructions if using SP Flashtool.
If you need any help on this device or flashing instructions, or you’ve got other contribution- do not hesitate to post in the comments section below. We do our best to reply and answer your questions.