Huawei Y3 II official stock firmware (FullOTA + Flashtool)



Updated: June 26, 2024

Download Huawei Y3 II official stock firmware update from the links in this post, and follow the provided flashing instructions to learn how to flash the stock ROM.

If you notice that any of the links provided below is broken or doesn’t work, please post in comments section so we fix and update it ASAP.

Huawei Y3 II Flashtool Firmware

The flashtool firmware files below should be flash via SP Flashtool. Be sure to check that you are flashing firmware for your exact device build number, to avoid bricking the phone.

Build/ RegionFirmware linkFile sizeOther info.
LUA-U22C326B104Download846 MB
LUA-U22C326B102Download846 MB
LUA-U22C479B006Download1 GBUse DA luna.bin
LUA-U22C479B004Download1.2 GBUse DA_LUNA_KEY.bin as DA file
LUA-U22C567B010Download1 GBBootloader MUST be unlocked first
LUA-L01_ALPS.L1.MP3.V2.95_OT6735M.35GU.L1_P63Download966 MB

Full OTA stock recovery firmware

Huawei Y3 II (LUA-L22) firmware

Build numberRegionFirmware linkFile size
LUA-L22_C567B101Sri LankaDownload913 MB

Huawei Y3 II (LUA-U22) firmware

Build numberRegionFirmware linkFile size
C567B010Nepal, Southern-East AsiaDownload966 MB
C328B005Western Africa, Eastern and Southern Africa, Middle East, Northern AfricaDownload941 MB
C567B010Sri LankaDownload996 MB
C328B013Middle East & AfricaDownload0.99 GB

How to flash Huawei firmware

In order to install this firmware on your device, you need:

  • SD card
  • Archive with firmware, downloaded from any link above (may contain dload folder with files- unlmt.cfg and update.zip or only update.zip)
  • Fully charged battery

So, in order to flash the firmware you need to perform the following steps:

  1. Copy the dload folder from the archive with the firmware to the root of the SD card (if the archive contains only the update.zip file – create the dload folder and copy the update.zip file and an empty file with the name unlmt.cfg into it);
  2. Reboot tablet;
  3. After the reboot, a green Android with gears should appear and the process of flashing will begin, during which a reboot will occur;
  4. As soon as the process is over – remove the SD card and the device will reboot. Do not insert the SD card until the device reboots again, and then do not forget to remove the firmware files from it.