Huawei Mate 8 official firmware update



Updated: June 26, 2024

Download Huawei Mate 8 official stock firmware (OTA update) from the link in this post, and follow the provided flashing instructions to learn how to flash the stock ROM.

If you notice that any of the links provided below is broken or doesn’t work, please post in comments section so we fix and update it ASAP.

Download Huawei Mate 8 firmware

Huawei Mate 8 NXT-C00 firmware

Build NumberFirmwareFile Size
NXTC00B386logDownload1.63 GB
NXTC00B386logDownload1.65 GB

Huawei Mate 8 NXT-CL00 firmware

Build NumberFirmwareFile Size
NXT-AL10C00B596NXT-CL00C00B596Download1.30 GB
NXT-CL00C92B592 (B577 – B592)Download1.29 GB
NXT-CL00C92B811 ( ( ( ( GB

Huawei Mate 8 NXT-DL00 firmware

Build NumberFirmwareFile Size
NXT-DL00C17B592 (B577 – B592Download1.29 GB
NXT-TL00C17B595NXT-DL00C17B595Download1.30 GB
NXT-TL00C17B596NXT-DL00C17B596Download1.30 GB
NXT-DL00C17B593Download1.30 GB
NXT-TL00C01B596NXT-DL00C01B596Download1.30 GB

Huawei Mate 8 NXT-L09 firmware

Build NumberFirmwareFile Size
NXT-L09C212B522Download1.32 GB
NXT-L09C432B583Download1.34 GB
NXT-L09C605B586Download1.33 GB
NXT-L09C605B580Download1.31 GB
NXT-L09C521B520Download1.31 GB
NXT-L09C69B511Download1.32 GB
NXT-L09C432B560Download1.39 GB
NXT-L09AC900B156Download1.43 GB
NXT-L09AC212B531Download1.33 GB

Huawei Mate 8 NXT-L29 firmware

Build NumberFirmwareFile Size
NXT-L29C432B583Download1.34 GB
NXT-L29C185B560Download1.39 GB
NXT-L29C185B580Download1.31 GB
NXT-L29C432B560Download1.39 GB
NXT-L29C185B582Download1.32 GB
NXT-L29C636B585Download1.30 GB
NXT-L29C185B560Download1.39 GB
NXT-L29C636B594aDownload1.33 GB
NXT-L29C185B585Download1.33 GB
NXT-L29C636B594Download1.33 GB

Huawei Mate 8 NXT-TL00 firmware

Build NumberFirmwareFile Size
NXT-TL00C01B592 (B577 – B592)Download1.29 GB
NXT-TL00C01B584Download1.29 GB
NXT-TL00C01B820 ( ( ( ( GB
NXT-DL00C17B596NXT-TL00C17B596Download1.30 GB
NXT-TL00C01B820 ( ( ( ( GB

How to flash Huawei Mate 8 firmware

In order to install this firmware on your device, you need:

  • SD card
  • Archive with firmware, downloaded from any link above (may contain dload folder with files- unlmt.cfg and update.zip or only update.zip)
  • Fully charged battery

So, in order to flash the firmware you need to perform the following steps:

  1. Copy the dload folder from the archive with the firmware to the root of the SD card (if the archive contains only the update.zip file – create the dload folder and copy the update.zip file and an empty file with the name unlmt.cfg into it);
  2. Reboot tablet;
  3. After the reboot, a green Android with gears should appear and the process of flashing will begin, during which a reboot will occur;
  4. As soon as the process is over – remove the SD card and the device will reboot. Do not insert the SD card until the device reboots again, and then do not forget to remove the firmware files from it.