This AGM A8 official firmware flash file (stock ROM) can help you easily un-brick or restore your device to its default or factory state.
If you have previously rooted or modified the system (or other) partition of the phone in any way, flashing this stock ROM will overwrite all existing modified system files to replace with factory software.
If you have you have important data on the phone (like contacts, messages, app data, etc), please back them up because you could loose data after flashing.
Charge the phone to at least 50% so that the flashing process will not be interrupted by low battery. Interrupting the firmware installation means bricking your phone.
Download the firmware file from the link below and follow the recommended flashing instructions immediately after the download options. Please report any broken links discovered.
Download AGM A8 official firmware flash file
Before you download any firmware below, ensure to read the Description column carefully. This will guide you to download the right firmware and not brick your phone. You have been advised!
|LA6622 (AGM_T88Q_14) _L1248.6.01.07.00_MultiDownload_201706011406_user
|Official firmware version 1.07 for AGM A8 (EN) 3 + 32 and 4 + 64
|Official firmware version 1.09 for AGM A8 (EN) 3 + 32 and 4 + 64
|AGM A8 (7.0)
|only for A8 7.0 device, can’t be used for update from 5.1 to 7.0
Important! Always backup existing firmware before flashing any firmware.
How to flash AGM A8
Follow the guide below to flash the OTA firmware for AGM A8:
- Download and unzip the archive
- Move the T88Q_14 folder to the root of an empty and clean SDcard
- Insert the SDCard into the phone and make sure the phone is completely shutdown
- Press and hold the following buttons- vol. Up + vol. Down + Power
- Wait for the installation to finish
(Note: All data on the device will be deleted)
If you have any questions or other contribution please post in comments section for assistance.