(Updated) How To Flash MTK Firmware In SP Flashtool

Flashing  stock firmware is pretty easy and simple using SP FlashTool. The tool works specifically for MTK (Mediatek) device.
Download the files below and follow the later instructions to learn how to use SP Flashtool to flash stock ROMs on supported devices.

Downloads:

  1. SP Flashtool – Download
  2. Mediatek Drivers – Download

How To Flash With Sp FlashTool

Step One:
Download and install drivers for your device. If you can’t find your device driver, us this guide to download and install the driver.
Step Two:
Download Sp Flashtool and the your phone’s firmware package. (Firmware list)
Step Three:
Extract Sp FlashTool and your firmware package to different folders
Step Four:
Open SP FlashTool folder and launch SP Flashtool.exe as Administrator
Step Five:
Click on Scatter-loading, browse and select scatter file from the folder you extracted the downloaded firmware. (e.g, MT6582_Android_scatter.txt
 
Step Six:
Click on Download and connect the device to PC via USB cable. Device must be turned off, before attaching to pc.
Step Seven:
Once the device is connected to PC, a progress bar will start loading. Wait for it to complete. A green circle with Ok should popup to indicate completion.
Step Eight:
Disconnect the device and perform a factory reset before you power on fully.
Done.
If you still have questions, please ask in comments. Need your device stock firmware, request in comments too.



8 Responses to “(Updated) How To Flash MTK Firmware In SP Flashtool”
  1. GHSS Kotli Loharan Sialkot (S.Usman) August 10, 2016
  2. Collins Edim August 10, 2016
  3. Anonymous September 25, 2016
  4. Collins Edim September 25, 2016
  5. salawudeen December 30, 2016
  6. basith January 10, 2017
    • Leakite January 10, 2017

Leave a Reply