Monday, August 15, 2016

Installing TWRP On Huawei P9 Easily

If you own a Huawei P9 device and wish to install a custom recovery on your device, Team Win Recovery Project is available to be flashed on your phone.

TWRP works just fine on all variants of Huawei P9. Download from the link below and learn how to flash it with ease.


Flashing TWRP on Huawei P9

  • After installing universal ADB / fastboot package downloaded from the link above,
  • Rename the downloaded twrp recovery file to twrp.img
  • In the folder where the twrp.img file is, run command prompt (shift button + right click, then select Open command window here)
  • Connect your device to PC via USB and type the following commands followed by Enter button at the end of each command
 adb reboot bootloader

Wait for device to shut down and boot into bootloader. Then type the following :

fastboot flash recovery recovery.img
fastboot reboot

That's all.

If you have any problems with flashing TWRP on you device, comment below.

Write replies
  1. error device ''<null' not found

    1. Reinstall (or install) your device driver; verify that the USB cable and port is not faulty; reboot your Computer and retry.


If your comment is unrelated to this article, post the problem, request or suggestion here instead.